One Touch Solutionss
One Touch Solutionss
CIT Nagar, Chennai, Tamil Nadu

Steel guard - proven Rust conventer

Offering you a complete choice of products which include dominator - proven rust converter.

Dominator - Proven Rust Converter

Dominator - Proven Rust Converter
  • Dominator - Proven Rust Converter
Get Best Quote
Approx. Price: Rs 800 / LitreGet Latest Price




Þ Converts adamantly adhering rust into ferroso-ferric oxide, an organo complex compound, resulting in the formation of a stable, non-porous and moisture-repelling coating of good mechanical stability, abrasion resistance, bond strength and excellent anti-corrosive properties.

Þ This coating is an ideal base for the subsequent protecting coat of paint.

Þ Use it by Brush or dip process depending upon the surface, its size, the location, total number of components to be treated etc.

Þ DOMINATOR comes handy where it is not possible to prepare the surface due to inadequate accessibility due to size, quantity etc.

DOMINATOR finds extensive use in

DOMINATOR is a brown liquid.

The shelf life is about two years.

One litre of DOMINATOR can treat between 100 and 125 sq.ft.



1. Remove oil, grease etc from the surface to be treated. {For this you may use our product 3in1 Rust Remover }

2. Remove loosely adhering rust from the surface by using a wire brush.

3. Apply DOMINATOR, as supplied, liberally by brush. Do not allow the chemical to ‘flow off’ the surface; it must stay on the surface in order to percolate through the crust of rust. The chemical will be effective only to the extent it percolates through the layer of rust right down to the substrate.

4. The reaction starts within minutes. The time DOMINATOR takes to penetrate through rust right upto the substrate, depends upon the type and degree of rust on the surface. For at least 6 hours after application of


DOMINATOR, the treated surface should remain free from rainwater or water splashes etc. If the surface does get splashed with water, apply DOMINATOR again.

5. Before application of paint, make sure that the treated surface is thoroughly dry, and that there is no trace of unreacted chemical on the surface. Normally, the residual chemical spends itself out by reacting with the surface. UNREACTED DOMINATOR WILL DISINTEGRATE THE PAINT COATING. Rinse the surface if you have a suspicion that the surface has unreacted chemical. After washing, allow the surface to completely dry and then paint.

6. Brush process will be suitable when treating large steel components exposed to hostile environments, salt spray, wind, rain, sleet, snow, hail, dust, dirt, abrasion, erosion and corrosion. For maximum penetration, work

DOMINATOR into rusted surfaces with a synthetic bristle brush. The surface becomes touch dry in about one hour depending upon the climatic condition.


DOMINATOR is non-flammable, and water based. When solvent based rust converters are used, chemical action will stop when the solvent evaporates. Under the film beyond a certain depth, rust will still be rust.

Safety precautions:

Þ Keep out of the reach of children.

Þ Wash hands with soap and water.

Þ If any material comes into contact with eyes or skin then wash immediately with copious amounts of water.

WARRANTY DISCLAIMER: The technical data given herein has been complied for the help and guidance of the metal pretreatment personnel and is based upon our experience and knowledge. However as we have no control over the way the chemicals are used, and the nature of surface in which these chemicals are used, no warranty express or implied is intended or given. We assume no responsibility whatsoever for coverage, performance or damages, including injuries resulting from use of this information or of products recommended herein.


Additional Information:

  • Minimum Order Quantity: 50 Litre
Yes! I am Interested

Explore more products

Reach Us
Lakshmana Perumal (Proprietor)
24/1A, Sri Hari Kripa Apartments, Dhamodharan Street T. Nagar
CIT Nagar, Chennai- 600017, Tamil Nadu, India

Call Us

Share Us


Send E-mailSend SMS