Steel Guard

Product Details:

Rust Preventive displaces water and moisture from the metal surfaces , Its very good wetting property , Rustoil performs effectively as a 'penetrating' fluid. Rustoil imparts Corrosion-resistance properties for about 4 months when stored under controlled conditions, and 1 to 3 months when stored outdoors.

Additional Information:

• Delivery Time: 2-3 working days

Product Details:

3 in 1 rust remover

removes thin, wet film of oil, grease etc,

removes light to medium rust in the case of cold rolled surfaces & removes white rust and the other chemical impurities from the surface of galvanized steel surfaces.

forms a composite phosphate coating on the treated surface, firmly adherent to and integral with the treated surface.

when treating galvanizes surfaces, converts part of the zinc into zinc phospate coating and forms a good surface for subsequent painting - liquid paint and powder coatings.

rust remover is formulated for surface preparation of 

hot-dipped / electro-galvanized sheets

 cast iron and forged compounds,

 machined steel components,

 slotted angles, gates etc.

 tubular structures

 steel sheets, and other structural steel for fabricating bodies on buses, lorries, vans,

tankers etc. In body-building.

usage :

 

1. Rust remover is generally used as a 1:1 solution; that is, mix equal volumes of rust remover and water. If the components have only light rust on the surface, rust remover may be mixed with water in the proportion of 1 volume rust remover to 2 volumes of water.

2. The solution may be made up and used in a good quality plastic mug or bucket, depending upon the quantity of chemical you need to work with.

3. Using a good quality brush, apply the rust remover solution liberally on the surface to be treated.

4. Brush the solution on the surface with some pressure, so that the brush scrapes the surface, thus helping chemical action with some abrasion also.

5. If, due to atmospheric condition, the chemical dries on the surface, apply rust remover solution again. The solution must be wet throughout the 5 or 10 minutes duration. A dry chemical will not react with the surface

and may not produce the desired results.

6. Allow the solution to be on the surface for about 5 to 10 minutes, depending upon the extent of rust and the way it has stuck to the metal surface.

7. Keep applying brush strokes, as this will ensure quicker and better rust removal.

8. You will find that the oil film and rust have been removed, and a surface has assumed a grey colour.

9. This grey colour is the colour of the phosphate coating. Sometimes, there will be a bluish shine also on the surface.

10. Using a clean, dry, white, starch-free cloth, wipe the surface dry. You cannot completely dry a surface by simply wiping. There will still be some moisture left on the surface. This is the residual chemical.

11. Allow time for the residual chemical to spend itself out by reacting with the surface.

12. When you are sure that the surface is dry, take it to the paint shop.

13. The treated surface may be stored overnight or two days, under controlled covered shed, away from water splashes.

14. Body salts are harmful to the metal finish, and advise the personnel not to handle treated components with unclean hands.

Additional Information:

• Delivery Time: 2-3 working days

Product Details:

We are one of the names to offer Rust Removers, which is water-based rust preventer that makes the applied surface corrosion and rust free. Processed as per the set industry procedures, the offered nanocoat imparts longer life to expensive machinery. Customers can acquire this product at market leading rates. Due to enhanced shelf life and effectiveness, it is widely desired.

Features:

• Longer shelf life
• Precise composition
• Removes Rust

Additional Information:

• Item Code: SG126
• Production Capacity: 500ml to 10ltrs

Product Details:

STEEL GUARD NANOCOAT

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product Steel Guard Nanocoat &Specialty Anti Corrosive Coatings, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

 

Product:

STEEL GUARD NANOCOAT is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of STEEL GUARD NANOCOAT is enough to act at molecular level and creates a micro nano film on steel and prevents rust and also increases bonding strength of steel upto300% with concrete in construction & paints. (Tests carried out at reputed institute)

 

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

 

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

100% rust free with just one coat of Steel Guard Nanocoat.

Additional Information:

• Delivery Time: 2 or 3 days
• Packaging Details: Safety packed by palstic can

Product Details:

Being one of the preferred choices of our customers, we are involved in the manufacture and trade of Steel Guard Nanocoat. This water-based solution has a low viscosity that offers a much higher coverage, which in return helps in huge cost reductions. Widely acclaimed and demanded by our esteemed customers, this steel guard nanocoat is an extremely cost effective option.

Features:

• Enhances the durability of machinery
• Easily applied
• Longer shelf life

Specifications:

Additional Information:

• Item Code: SGN04

Product Details:

STEEL GUARD NANOCOAT (Antirust Chemical)

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product “Steel Guard Nanocoat & Specialty Anti Corrosive Coatings”, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

STEEL GUARD NANOCOAT ™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “STEEL GUARD NANOCOAT™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Additional Information:

• Production Capacity: 1 ltr to 10ltr
• Delivery Time: 2 to 3 working days
• Packaging Details: fully covered by plastic

Product Details:

STEEL GUARD NANOCOAT (Antirust Chemical)

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product “Steel Guard Nanocoat & Specialty Anti Corrosive Coatings”, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

STEEL GUARD NANOCOAT ™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “STEEL GUARD NANOCOAT™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto 300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Additional Information:

• Delivery Time: 2 to 3 working days

Product Details:

STEEL GUARD NANOCOAT

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product “Steel Guard Nanocoat & Specialty Anti Corrosive Coatings”, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

STEEL GUARD NANOCOAT ™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “STEEL GUARD NANOCOAT™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Additional Information:

• Production Capacity: 1 ltr to 10 ltrs
• Delivery Time: 1 to 3 days
• Packaging Details: MS Grill, Gate, TMT Rebars can applying

Product Details:

SG-50

A multi- purpose product 

(Lubricant, Corrosion Protection and Rust Remover )

 

SG-50  a specially designed product  to  lubricate moving parts such as hinges, wheels, rollers,  chains, and gears.

SG-50 protects against rust and corrosion on items like machined components, tools, and sporting equipment.

SG-50  is capable of penetrating to free stuck corroded parts like nuts, bolts, valves and locks.

SG-50  effectively removes glues and adhesives, corrosion and paint.

SG-50  is capable of DeWatering ( displacing water ) and moisture to restore rinsed, water clogged equipment such as engines, spark plugs and power tools.

SG-50  does not contain chloroflurocarbons (CFCs),  does not contain Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium, (Cr6), Polybrominated biphenyls

(PBB), or Polybrominated diphenylether.

 

Appearance:      Color:   Brownish

Odor:    Characteristic

Flash Point:   49˚ C (122˚ F)

Volatile by volume:   70% - 75%

Lower flammability limit:   0.6%

Upper flammability limit:   8.0%

 

CAUTION:  SG-50 is Flammable. Harmful or fatal if swallowed. May cause eye irritation. Avoid eye contact. Use with adequate ventilation. Keep away from heat, sparks and all other sources of ignition.

Additional Information:

• Delivery Time: 2 to 3 working days

Product Details:

FINCARE is a SINGLE-PACKhigh performance grafted co-polymer based protective coating for application where heat transfer properties along with corrosion resistance areof importance.FINCARE is specially designed for HVAC coils, HVAC fins and radiator coils.

Additional Information:

• Delivery Time: 2 TO 3 WORKING DAYS
• Packaging Details: SAFETY PACKED BY CONTAINER

Product Details:

Anti Rust Chemical - "Steel Guard Nanocoat"

Steel Guard is the Inorganic Nano technological Water based chemical which has got the property of removing rust formation in Mild Steel. 

Features: Water Based Formulation
Non FlammableEco Friendly
Non ToxicComplies ROHS standard.
No change in gauge of substrate after application.Easy to use; Spray, Dip or Brush application
Stability to wide range of temperature

Additional Information:

• Delivery Time: 2-5 Working days

Product Details:

STEEL GUARD NANOCOAT

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product Steel Guard Nanocoat &Specialty Anti Corrosive Coatings, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

STEEL GUARD NANOCOAT  is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of STEEL GUARD NANOCOAT  is enough to act at molecular level and creates a micro nano film on steel and prevents rust and also increases bonding strength of steel upto300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Product Details:

STEEL GUARD NANOCOAT

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product “Steel Guard Nanocoat & Specialty Anti Corrosive Coatings”, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

STEEL GUARD NANOCOAT ™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “STEEL GUARD NANOCOAT™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto 300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Additional Information:

• Item Code: Antirust
• Delivery Time: 3 days
• Packaging Details: Available in 100 ml, 300 ml, 500 ml, 1 litre,.........200 litre .

Product Details:

A unique formulation is based on 'Grafted Copolymer technology' to prevent corrosion of metals in varied climatic conditions for high end industrial applications. Use of our specialty paints adds the value to the product by enhancing its lifespan and also reduces the cost of entire operation. Thus it offers a real techno commercial benefits to the users.

Unique features

• Single pack; Ready to Use System (No need of mixing)
• Quick Drying at room temperature (Dries within 30 minutes)

Additional Information:

• Production Capacity: 1000 LITRES

Product Details:

STEEL GUARD NANOCOAT

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product “Steel Guard Nanocoat & Specialty Anti Corrosive Coatings”, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

STEEL GUARD NANOCOAT ™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “STEEL GUARD NANOCOAT™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto 300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Additional Information:

• Item Code: AntiRustOil
• Production Capacity: liquid
• Delivery Time: 3 days
• Packaging Details: All 100Ml, 200Ml, 500Ml, 1Litre........200Ml.

Product Details:

Rust Preventive displaces water and moisture from the metal surfaces , Its very good wetting property , Rustoil performs effectively as a 'penetrating' fluid. Rustoil imparts Corrosion-resistance properties for about 18 months when stored under controlled conditions, and 6 to 12 months when stored outdoors.

Additional Information:

• Delivery Time: 2-3 Working days

Product Details:

Steel Guard Nano coat

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product “Steel Guard Nanocoat & Specialty Anti Corrosive Coatings”, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

Steel Guard Nanocoat ™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “Steel Guard Nanocoat™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Additional Information:

• Delivery Time: 2 TO 3 WORKING DAYS

Product Details:

STEEL GUARD NANOCOAT

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product “Steel Guard Nanocoat & Specialty Anti Corrosive Coatings”, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

STEEL GUARD NANOCOAT ™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “STEEL GUARD NANOCOAT™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto 300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Additional Information:

• Delivery Time: 2 to 3 working days

Product Details:

STEEL GUARD NANOCOAT

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product “Steel Guard Nanocoat & Specialty Anti Corrosive Coatings”, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

STEEL GUARD NANOCOAT ™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “STEEL GUARD NANOCOAT™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto 300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

·         Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat. 

·         Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

·         Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

·         Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

·         Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

·         No need of Primers & Red Oxide.

 

·         100% rust free with just one coat of Steel Guard Nanocoat.

Additional Information:

• Production Capacity: 500ml to 10 ltrs
• Delivery Time: 2 to 3 working days
• Packaging Details: Plastic covered fully

Product Details:

STEEL GUARD NANOCOAT

We would like to introduce ourselves as a Trading Company dealing with numerous Top Quality products for the past 37 years and wish to give an outline of our product “Steel Guard Nanocoat”,an Anti Rust Compound forever for all types of Steel & Iron.

Product:

STEEL GUARD NANOCOAT ™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “STEEL GUARD NANOCOAT™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto 300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Additional Information:

• Item Code: Guardian
• Production Capacity: liquid
• Delivery Time: 3
• Packaging Details: Available in 100 ml, 300 Ml, 500Ml, 1 Litre ... 200 Litre

Product Details:

STEEL GUARD NANOCOAT

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product “Steel Guard Nanocoat & Specialty Anti Corrosive Coatings”, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

STEEL GUARD NANOCOAT ™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “STEEL GUARD NANOCOAT™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto 300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Additional Information:

• Item Code: GuardianNanoCoat
• Production Capacity: liquid
• Delivery Time: 3
• Packaging Details: All 100Ml, 200Ml, 500Ml, 1Litre.... 200 Litre

We are a highly acclaimed company that offers a wide range of Steel Guard Nanocoat. The Steel Guard Nanocoat we offer is manufactured using premium grade base material sourced from reliable dealers of the industry that ensure their reliability and durability. We are offering Steel Guard Nanocoat in different sizes and technical specifications.

 

Features:

 

• Longer shelf life
• Precise composition
• Protects rust and corrosion

 

Safe Eco - friendly treatment (MSDS):

 

• Steel guard nanocoat confirms to rohs (reduction of hazardous substance directive 2002/95/ec) thereby it does not contain lead, hexavalent chromium, mercury, cadmium, polybrominated diphenyl ethers
• Steel guard nanocoat “is an inorganic, non – inflammable, non evaporative, non – toxicant, fire retardant liquid having no polar formation and electro static effect on steel

Additional Information:

• Item Code: SGN05

Product Details:

We are a highly acclaimed company that offers a wide range of Steel Guard Nanocoat. Designed in compliance with international quality norms and standards, Steel Guard Nanocoat is manufactured using superior steel metal and latest technology to ensure their longer durability. In addition to this, we have the capability to customize Steel Guard Nanocoat as per the demands and needs of customers.

 

Features:

 

• Longer service life
• Light weight
• Seamless finish

Product Details:

A unique formulation is based on Grafted Copolymer technology to prevent corrosion of metals in varied climatic conditions for high end industrial applications. Use of Anticor adds the value to the product by enhancing its lifespan and also reduces the cost of entire operation. Thus it offers a real Technocommercial benefits to the users.
Unique features
Single pack; Ready to Use System (No need of mixing)
Quick Drying at room temperature (Dries within 30 minutes)

Additional Information:

• Delivery Time: 10 days

Product Details:

STEEL GUARD NANOCOAT

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product “Steel Guard Nanocoat & Specialty Anti Corrosive Coatings”, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

STEEL GUARD NANOCOAT ™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “STEEL GUARD NANOCOAT™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto 300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Additional Information:

• Production Capacity: 5 ltrs
• Delivery Time: 2 to 3 days
• Packaging Details: Fully covered by plastic

Product Details:

Steel Guard Nanocoat

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product Steel Guard Nanocoat &Specialty Anti Corrosive Coatings, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

Steel Guard Nanocoat
 is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of Steel Guard Nanocoat
is enough to act at molecular level and creates a micro nano film on steel and prevents rust and also increases bonding strength of steel upto300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nano coat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nano coat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nano coat.

Additional Information:

• Delivery Time: 2 to 3 working days
• Packaging Details: Fully covered by plastic

Product Details:

STEEL GUARD NANOCOAT

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product “Steel Guard Nanocoat & Specialty Anti Corrosive Coatings”, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

STEEL GUARD NANOCOAT ™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “STEEL GUARD NANOCOAT™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto 300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Additional Information:

• Delivery Time: 2 TO 3 WORKING DAYS

Product Details:

STEEL GUARD NANOCOAT

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product Steel Guard Nanocoat &Specialty Anti Corrosive Coatings an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

STEEL GUARD NANOCOAT is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of STEEL GUARD NANOCOAT is enough to act at molecular level and creates a micro nano filmon steel and prevents rust and also increases bonding strength of steel upto300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Additional Information:

• Delivery Time: 2 to 3 working days
• Packaging Details: Safety packaging with plastic covered

Product Details:

STEEL GUARD NANOCOAT

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product “Steel Guard Nanocoat & Specialty Anti Corrosive Coatings”, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

STEEL GUARD NANOCOAT ™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “STEEL GUARD NANOCOAT™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto 300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

·         Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

·         Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

·         Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

·         Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

·         Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

·         No need of Primers & Red Oxide.

·         100% rust free with just one coat of Steel Guard Nanocoat.

Additional Information:

• Delivery Time: 2 to 3 working days

Product Details:

Steel Guard nanocoat

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product “Steel Guard Nanocoat & Specialty Anti Corrosive Coatings”, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

Steel Guard nanocoat™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “STEEL GUARD NANOCOAT™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nano coat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Product Details:

STEEL GUARD NANO COAT

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product teel Guard Nanocoat &Specialty Anti Corrosive Coatings, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

STEEL GUARD NANOCOAT  is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of STEEL GUARD NANOCOAT is enough to act at molecular level and creates a micro nano filmon steel and prevents rust and also increases bonding strength of steel upto300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Additional Information:

• Production Capacity: 500ml to 10ltrs
• Delivery Time: 2 to 3 days
• Packaging Details: plastic

Product Details:

A unique formulation is based on 'Grafted Copolymer technology' to prevent corrosion of metals in varied climatic conditions for high end industrial applications. Use of Anticor adds the value to the product by enhancing its lifespan and also reduces the cost of entire operation. Thus it offers a real 'Technocommercial' benefits to the users.
Unique features
Single pack; Ready to Use System (No need of mixing)
Quick Drying at room temperature (Dries within 30 minutes)

Additional Information:

• Production Capacity: 1000 LITRES
• Delivery Time: IMMEDIATELY

Product Details:

As an affluent name in this domain, we hold expertise in providing high-quality Aluminum Coil Cleaner.

Other Details:

• Easy to use; requires no agitation
• Leaves aluminum clean and shiny
• Powerful foaming action with instant results
• No harsh odors
• Remove scalings

Additional Information:

• Delivery Time: 2-3 working days

Product Details:

Steel Guard Nanocoat

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product “Steel Guard Nanocoat & Specialty Anti Corrosive Coatings”, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

Steel Guard Nanocoat ™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “Steel Guard Nano coat™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nano coat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nano coat is first of its kind of rust preventive product in India.

· Steel Guard nano coat can be painted with or without primers.

· Steel Guard nano coat can cover approx. 180 - 200sq. ft. surface area per liter.

· Steel Guard nano coat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Product Details:

STEEL GUARD NANOCOAT

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product “Steel Guard Nanocoat & Specialty Anti Corrosive Coatings”, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

STEEL GUARD NANOCOAT ™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “STEEL GUARD NANOCOAT™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Steel Guard nanocoat

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product “Steel Guard Nanocoat & Specialty Anti Corrosive Coatings”, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

Steel Guard nanocoat™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “STEEL GUARD NANOCOAT™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nano coat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nano coat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nano coat is first of its kind of rust preventive product in India.

· Steel Guard nano coat can be painted with or without primers.

· Steel Guard nano coat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nano coat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Product Details:

Steel Guard Nanocoat (Antirust Chemical)

We would like to introduce ourselves as a pioneers in giving permanent solutions to our clients with numerous  Trading Company dealing with numerous Top Quality products for the past 37 years and wish to give an outline of our product “Steel Guard Nanocoat”,an Anti Rust Compound forever for all types of Steel & Iron.

Product:

Steel Guard Nanocoat
™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “STEEL GUARD NANOCOAT™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nano coat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nano coat is first of its kind of rust preventive product in India.

· Steel Guard nano coat can be painted with or without primers.

· Steel Guard nano coat can cover approx. 180 - 200sq. ft. surface area per liter.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nano coat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nano coat.

Product Details:

STEEL GUARD NANOCOAT

We would like to introduce ourselves as a pioneers in giving permanent solutions with numerous Top Quality products for the past 4 decades and wish to give an outline of our product “Steel Guard Nanocoat & Specialty Anti Corrosive Coatings”, an Anti Rust Compound forever for all types of ferrous & non-ferrous metals.

Product:

STEEL GUARD NANOCOAT ™ is a ready to use Rust Preventive & Rust Resistant formula. One thin layer of “STEEL GUARD NANOCOAT™” is enough to act at molecular level and creates a micro ‘nano film’on steel and prevents rust and also increases bonding strength of steel upto 300% with concrete in construction & paints. (Tests carried out at reputed institute)

Application:

1. Steel Guard nanocoat to be applied after cleaning the surfaces or parts from the Dust,

Rusty Particles, Soil, Grease or Oil etc.

2. Steel Guard nanocoat can be applied by Brushing or spraying or dipping method.

3. Any skilled or unskilled worker can apply the Steel Guard nanocoat.

Salient Features:

· Steel Guard nanocoat is first of its kind of rust preventive product in India.

· Steel Guard nanocoat can be painted with or without primers.

· Steel Guard nanocoat can cover approx. 180 - 200sq. ft. surface area per litre.

· Steel Guard nanocoat can be applied on all types of construction steel material or industrial MS Products. E.g.: Rods, Channels, Shutters, Girders, Sheets, Jobs, etc.,

Advantages of Using Steel Guard Nanocoat:

· Increases bonding strength between Construction Steel (TMT Rebars) & cement slurry upto 300% by single coat.

· Construction steel will not get corroded even in sea-shore areas. Thus it helps to protect the buildings from cracks.

· Protects your Steel & Iron materials like Shutters, Gates, Window Frames, Grills, etc., from rust forever just with a single coat.

· Adds Gloss of Paint & Primer. Peeling off of paints is stopped completely.

· Water Based Organic Chemical, Eco Friendly, R.O.H.S approved.

· No need of Primers & Red Oxide.

· 100% rust free with just one coat of Steel Guard Nanocoat.

Additional Information:

• Delivery Time: 2 to 3 working days

Product Details:

Backed by a team of skilled and experienced professionals, we are involved in the manufacture, trade and wholesale of Steel Guard Nanocoat. Offered at industry leading rates, this steel guard nanocoat is processed in accordance with the set industry procedures. Inorganic, non evaporative, non flammable and non toxicant, this cost effective solution has no electro static effect on steel.

Features:

• Applied easily
• Longer shelf life
• Correct composition

Specification:

 

• Thickness of 0.2 micron under delta meter

Additional Information:

• Item Code: SGN02

Product Details:

A unique formulation is based on 'Grafted Copolymer technology' to prevent corrosion of metals in varied climatic conditions for high end industrial applications. Use of Anticor adds the value to the product by enhancing its lifespan and also reduces the cost of entire operation. Thus it offers a real 'Technocommercial' benefits to the users.
Unique features
Single pack; Ready to Use System (No need of mixing)
Quick Drying at room temperature (Dries within 30 minutes)

Additional Information:

• Production Capacity: 1000 LITRES
• Delivery Time: IMMEDIATE
• Packaging Details: TIN ,CARTON BOXES,